What an annual service actually covers
A service is maintenance. The engineer opens the boiler up, checks how it is burning, measures what comes out of the flue, and cleans and adjusts what needs it. A boiler burning cleanly uses less gas for the same heat.
It is also where small faults are caught early: a seal going, an expansion vessel losing charge, a condensate trap silting up. Cheap to sort in October, expensive in January. You get a written record of the readings.
Checked on the day
- Flue and combustion analysis
- Gas rate and operating pressure
- Burner and heat exchanger
- Seals and case integrity
- Safety devices and cut-outs
- Condensate trap and pipe
- System pressure and expansion vessel
- Controls, thermostat and timer
A service and a gas safety check are not the same thing
This catches landlords out. A gas safety check asks one question: is the appliance safe to use now. A service is maintenance, carried out to the manufacturer's instructions.
HSE treats maintenance as a duty separate from the annual check and says plainly that you should not assume one covers the other. We often do both on one visit, but they are two pieces of work.
Last checked 12 September 2026. Source: HSE landlord gas safety guidance.
Common boiler problems
Most call-outs come down to a handful of faults.
No heating or hot water
Often a failed diverter valve, a stuck pump or a control fault rather than the boiler.
Pressure keeps dropping
Usually a small leak, a failed expansion vessel or a passing pressure relief valve.
Frozen condensate pipe
A common winter lockout where the pipe runs outside in a narrow diameter.
Banging and kettling
Scale or sludge on the heat exchanger. Left alone it shortens the boiler's life.
Lockout and error codes
The boiler shutting itself down. The code narrows the cause but still needs testing on site.
Cold radiators
Cold at the top means air; cold at the bottom usually means sludge.
When a repair beats a replacement
A repair is usually the better buy when the fault is one named part, that part is still made, and the boiler has otherwise been reliable. Plenty of boilers run well for years after a pump, fan or diverter valve is changed.
Replacement starts to make sense when parts are obsolete, the boiler has failed more than once in a year, or the repair costs a large share of a new unit. If that is where yours is, the engineer will say so and explain why.
If you let the property
The annual gas safety check is a legal duty. A service is separate.
A check every 12 months
Each gas appliance and flue you provide must be safety checked every 12 months by a Gas Safe registered engineer.
Share and keep the record
The record goes to an existing tenant within 28 days, and to a new tenant before they move in. Keep copies two years.
You can go early
The check can be done up to two months early while keeping the original anniversary date.
What it costs
We confirm a fixed price for the service before we book, based on the boiler and where it sits. Nothing is added on the day without asking you first.
If the service turns up a fault, repair work is charged by the hour. Members pay from £75 an hour on Gold and Platinum or from £80 on Bronze and Silver, and no plan carries a call-out fee.
Boiler brands we service
Tell us the make and model when you book.
Who does the gas work
Hem itself is not Gas Safe registered. Gas work booked through us is carried out by Gas Safe registered engineers we work with. You can check any engineer's registration before they start.
We cover everywhere inside the M25 and just outside it.
Boiler servicing questions
How often should a boiler be serviced?
Once a year is the usual advice, and many manufacturers make an annual service a condition of their warranty, so check the paperwork that came with your boiler.
Is a boiler service the same as a gas safety check?
No, and HSE says not to assume one covers the other. A safety check asks whether an appliance is safe to use now. A service is maintenance that keeps it working. Landlords owe both duties.
How much does a boiler service cost in London?
We confirm a fixed price before we book, based on the boiler and where it sits. No plan carries a call-out fee, and if the service turns up a fault, members pay a lower hourly rate for the repair.
Are your engineers Gas Safe registered?
Hem itself is not Gas Safe registered. Gas work is carried out by Gas Safe registered engineers we work with, and you can check any engineer's registration before they start.
My boiler keeps losing pressure. Is that serious?
Water is leaving the system somewhere: a drip on a radiator valve or joint, a failed expansion vessel, or a relief valve passing outside. Topping it up weekly is a sign to get it looked at.
Should I repair or replace an older boiler?
Repair usually wins where the fault is one named part, the part is still made and the boiler has been reliable. Replacement makes sense when parts are obsolete, or the repair costs a large share of a new unit.
Do you service all boiler brands?
We cover the major manufacturers, including Vaillant, Worcester Bosch, Baxi, Ideal, Glow-worm and Potterton. Tell us the make and model when you book so common parts can be on the van.
Do you cover my area?
We cover everywhere inside the M25 and just outside it. If you are not sure, call 07576 588947 and we will tell you straight away.
Related pages
If the boiler has already stopped, start with boiler repairs. Landlords also need a gas safety certificate each year, and a membership lowers the hourly rate on repairs.
The landlord duties on this page are taken from the HSE guidance on gas safety for landlords and were last checked on 12 September 2026. It is a summary, not legal advice, and the rules can change. Landlords remain responsible for confirming their own obligations.